Hello Friends.
After another friend's request, I start building a deep v boat, intended as bait boat.
The first designed version was 180cm, but that was really too much and inconvenient to carry around as a "fishing utility". That also pushed 3 x times the limits of my cnc router which has max 60cm operating range, so redesigned it to fit a lot of parameters.
In this boat I will install a telemetry system, based on my original telemetry development ,
slightly modified from the original version which will feed data to the fisher-pilot :
After the design I followed the conversion protocol in order to generate the GCode.
Then I started cutting a 3mm ply wood and made this
Then had to glue these pieces together .
The creation goes on. For now, glue has to dry out
OK, a new update 13/7/2016
After 10 days and lots of painting and drying and sanding, i guess its time for the sea !
Here is the third test
After another friend's request, I start building a deep v boat, intended as bait boat.
The first designed version was 180cm, but that was really too much and inconvenient to carry around as a "fishing utility". That also pushed 3 x times the limits of my cnc router which has max 60cm operating range, so redesigned it to fit a lot of parameters.
(The blueprint)
slightly modified from the original version which will feed data to the fisher-pilot :
- Distance from home(or shore or starting point or set point)
- Speed (Kmph/kts)
- Water Temperature c/f
- Ambient temperature (external) c/f
- Internal Temperature c/f
- ESC Temperature c/f
- Battery Voltage (battery of ship)
After the design I followed the conversion protocol in order to generate the GCode.
Then I started cutting a 3mm ply wood and made this
Then had to glue these pieces together .
And after gluing, more gluing followed which gave a boat shape to the wood parts
And again, more gluing
The creation goes on. For now, glue has to dry out
OK, a new update 13/7/2016
After 10 days and lots of painting and drying and sanding, i guess its time for the sea !
Here is the third test
Δεν υπάρχουν σχόλια:
Δημοσίευση σχολίου